spica logo

This is a listing of specifications, manuals and sales flyers that I could find for Spicas. Do you have something that belongs here (specs, manual, sales flyer, etc), !
Spica SC-50
SC-50i Brochure
 SC-50i Manual
SC-50
Released: 1979
Drive-units: 6.5" woofer, 1" tweeter

Replacement Drivers:
Woofer:   (needed)
Tweeter: (needed)

TC-50
 TC-50 Sales Flyer
 TC-50 Manual
 TC-50 Man. (early)

TC-50
Released: 1983,  est. 20,000 total sold (post)
approx 7,500 TC-50's / 12,500 TC-50i
Description: Two-way, stand-mounted loudspeaker.
Drive-units: 1" soft-dome tweeter, 6.5" pulp-cone woofer.
Low-frequency alignment: sealed-box Q=0.78.
Crossover frequency: 2kHz.
Crossover: high-pass slope, approximately first-order, 6dB/octave; low-pass slope, fourth-order, 24dB/octave, Bessel; both drivers connected with the same polarity.
Frequency response: 60Hz-17kHz (-3dB).
Sensitivity: 84dB/W/m.
Nominal impedance: 4 ohms (3.6 ohms min. at 4kHz).
Amplifier requirements: 25-100W.
Maximum power handling: 50W continuous, 100W peak.
Dimensions: 15.5" (394mm) H x 13" (330mm) W
x 11.6" (295mm) D.
Weight: 20 lbs (9.07 kg) each.
Price: $420/pair (1984) / $450/pair (1986-1988); $550/pair in oak or walnut

Replacement Drivers:
Woofer: HIF 17JS  2 CA12, 4 Ohm Polydor/Audax
Tweeter: HD 100 D25, 4 Ohm Polydor/Audax

TC-50i (improved)
Released: 1988, est. 12,500 (i) units
The TC-50i received a different tweeter and woofer the crossover was modified. The 50is can be readily identified by the square hole in the felt padding.

Replacement Drivers:
Woofer:
HIF 17JVX  2CA 2, 4 Ohm Polydor/Audax
Tweeter: DTW 100 TF, 4 Ohm Polydor/Audax

Spica Subwoofer
 Sales Flyer (needed)
 Servo Sub Manual
Servo Sub
Released:1985, 8"
Description:
8" cone subwoofer in sealed module with 50-watt servo amplifier.
Crossover: 88Hz. (external adjustable)
Dimensions: 18" H x 15" W x 16: D.
Price: $595 (Crossover and Servo Amplifier included)

Spica Angelus Flyer
 Angelus Flyer
 Angelus Manual

Angelus
Released: 1987, est. 2,000+ units
Description: Two-way, floor-standing loudspeaker. Bass loading: sealed-box, system resonance at 34Hz with a Q of 0.5.
Drive-units: 1" soft-dome tweeter, 8" TPX-coned bass/midrange driver.
Frequency response: 45Hz-17.5kHz (-3dB)
(90Hz-15kHz ±1.5dB).
Crossover frequency: 3.4kHz.
Sensitivity: 87dB/W/m.
Impedance: 8 ohms (min. 5.8 ohms at 8.5kHz).
Amplifier requirements: 20-200W.
Dimensions: 46" H x 21" W x 10.25" D.
Internal volume: 2.5 cu.ft.
Weight: 65 lbs each.
Price: $949/pair-$995/pair (1988); $1275/pair (1993).
Approximate number of dealers: 140.

Replacement Drivers:
Woofer:
TX20X2SRSC, 8 Ohm  Polydor/Audax
Tweeter: HD12X9D25, 8 Ohms Polydor/Audax

 Spica SC-30
 SC-30 Sales Flyer
 SC-30 Manual
SC-30
Released: 1989
Frequency Response: (-3dB): 54 Hz-27kHz
Woofer: 8" pulp cone
Tweeter: 1.5" polypropylene cone
Crossover: 3rd order at 3kHz
Crossover frequency: 3kHz.
Frequency response: 54Hz-27kHz (-3dB)
Input Impedance: 8 ohms nominal
Amplifier requirements: 25-100W.
Sensitivity: 88dB/W/m.
Power handling: 50W continuous, 100W peak
Dimensions: 10" W x 23" H x 11.75" D
Weight: 28 lbs. each
Price: $399 (1992)
Approximate number of dealers: 120 (1989)

Replacement Drivers:
Woofer:
(needed) Polydor/Audax
Tweeter: (needed) Polydor/Audax

Spica TC-60
TC-60 side

 Sales Flyer (needed)
pdf Sales Flyer 6 ohm
pdf Sales Flyer 8 ohm
 TC-60 Manual
pdf Gravity Stands

TC-60

Released: 1994
Description: Two-way, stand-mounted, reflex-loaded (QB3 alignment) loudspeaker.
Drive-units: 1" (25mm) impregnated cloth-dome tweeter; 6.5" (165mm) polypropylene-cone woofer. Measured crossover frequency: 3.4kHz.
Electrical crossover slopes: first-order, 6dB/octave, high-pass to tweeter; fourth-order Bessel, 24dB/octave, low-pass to woofer.
Frequency response: 48Hz–20kHz (-3dB).
Sensitivity: 87dB/W/m (2.83V).
Nominal impedance: 8 ohms
(5.6 ohms minimum at 10kHz).
Power handling: 60W continuous, 120W peak.
Dimensions: 21.25" (540mm) H x 11.5" (292mm) W
x 10.5" (267mm) D.
Weight: 26 lbs (11.8kg) each.
Finishes available: natural wood veneers.
Price: $795/pair in oak, not including stands (matching "Gravity" stands cost $250/pair); $825/pair in black; $895/pair in cherry.
Approximate number of dealers: 75 (Dec.1994)

Replacement Drivers:
Woofer:
(needed) Peerless?
Tweeter: (needed) Vifa?